Extended Workshop Opening Hours

Posted on by

General Workshop 2015 (3)Due to high demand on the facility we have been able to agree later opening hours for a trial period of 3 weeks starting May 11th and ending May 28th.

The workshop will remain open Monday -Thursday until 19.30 when students will be asked to clean up your workspace as normal in preparation for the following day. These temporary opening times are as follows:

Monday 09.30 – 19.30

Tuesday 09.30 – 19.30

Wednesday 09.30 – 19.30

Thursday 09.30 – 19.30

Friday 09.30 – 16.30

This time is in addition to our normal working day (09.30 – 16.30) and therefore does not mean you should turn up any later than normal. If this period is found to be ineffective at reducing the stress on the facility it is unlikely we will be doing it again so please make the most of the time.

So far this year there have been some great models produced and we hope the next few weeks will see some more great results. Make the most of it!

Scott and Jim

‘Peacock Museum’ 1:50 Cross Section Model by Mahishini Vasudevn

Posted on by

DSC04037

In another First Year case study we asked Mahishini Vasudevn to tell us about her recently completed project for the ‘Resolution’ brief:

“For our first project, habitat, I chose Peacock as my animal client so I made a design that would stand proudly and attract the eyes of the people just like the Peacock would do. To portray this, my design had a cantilevered floor which protrudes over the pavement of my site in Charles Street. The facade was designed to have stained glass which had the same colours as the peacock. In my design I have mainly focused on grasping the attention of people instantaneously.

In order to convey the most information about my design, I made a sectional model to give an insight to the structural aspects and the interior detailing of the design like the cantilevered stairs and the circulation around the building.

DSC04091

In the case of materials, for the glass facade I have used coloured acrylic as it best represents the colour and transparency that is implied in my design.  As for the columns, beams and floor joists I used Styrene H-columns which were sprayed in black to represent steel frames. The floors were made with MDF wood to replicate the wooden floors. The pathway with granite paving slabs was laser engraved on grey card to show the colour and the small amount of texture that I wanted to show. The interior was done with wood and acrylic. In my model I have tried my best to produce them in such a way that they almost represent the same materials that would be used in reality if it were to be built.

DSC04135

Through making this model I have learnt new techniques of model making. It has taught me more about my design like the structural connections and how a design comes together as I was able to have a 3D view of my design. I’ve learnt how to plan my work and handle time with care.

Model making has been the best experience I’ve had as a first year architecture student and I’ve enjoyed working in the workshop.”

IMG_8084 This model is put together with a good selection of materials that help to demonstrate the different component of the design shown in section. Mahishini made good use of pre existing strip materials by choosing styrene H beams to construct what would be the steel frame of her building if made at 1:1. Strip materials such as these are extremely useful in section modelling and we hope to stock a range in the near future. In the mean time they are available from 4D Modelshop where you can also register for a student discount quoting either myself or Jim as your tutor here at Manchester.

IMG_8152 IMG_8244

IMG_8088 IMG_8248 IMG_8250

‘Arch Game Lab’ 1:50 Cross Section Model by Estelle Xin Yun Ang

Posted on by

DSC04032

First Year Student Estelle Xin Yun Ang has just completed a 1:50 section model of her proposal for the re-purpose of vacant space under a railway arch way. Estelle kindly described her project for us:

“I chose to build a model in which part of the facade was removed to communicate the details of interior spaces and the assembly of structural components. The railway arch was modelled as a section to show how it acts as the ceiling of my design. I modelled the underground and made a window to give a good view into the basement. The facade detail was quite important in order for me to express the sense of gaming, which was why I took the time to paint the tiny offcuts.

DSC04082

The exterior spaces surrounding my design is extensively graffitied which inspired me to design a gaming studio where the potential of play is explored. I incorporated game buttons into the design of the facade to convey my idea of gaming.

DSC04092

To model the context, I decided to use plywood as the texture provides a good representation of the brickwork for the archway. For the ground/base, I used mdf wood and applied wood stain to give a good contrast to the light coloured arch. I spray painted the laser cut mdf in grey to show the concrete floor plates. For the walls I chose to use vac-formed styrene to achieve a permanent curved shape. I added strips of acrylic between the two pieces of styrene to make up the thickness of the wall and that helped save some material.

DSC04120 DSC04139

 

I overcame the difficulties of modelling the curved shape of my design and I have learned to use different techniques on different materials to achieve the best result. After a few trials and errors I was able to understand the construction of my design. This is what I find interesting because there are so many ways in making a model and through experimentation I get to know which method works best for my design.”

IMG_8220 IMG_8226 IMG_8228

What is clearly shown in this model is the attention to making each element correct for assembly. This patience and consideration is something we should all aspire to when designing and making. Often one of the hardest things to do during a project is accept that something you have made is incorrect and should therefore be re-made. Whilst this may seem like wasted time it is exactly the opposite and by taking a step back from the project to look at what you have learned you will see that such mistakes are necessary for your own understanding of the design as well as gaining a better understanding of material and machine constraints when making.

We hope to see more projects with this level of thought and consideration in the coming weeks leading up to the final submissions and in future first years.

IMG_8259 IMG_8262

1st Year History of Architecture Paradigms Project

Posted on by

We’ve had a busy few weeks in B.15 with the last week and half dominated by this first year project.

In conjunction with a series of paradigms lectures first year students have been asked to choose a piece of historically significant architecture to replicate and study through multiple means. One of the requirements of this brief has been to produce a section model allowing the observer to view the construction framework and internal layout of the building they are looking at.

1st year paradigms 2015 (6)

1st year paradigms 2015 (1) 1st year paradigms 2015 (7)1st year paradigms 2015 (10)

The results from this have been very good with groups taking time to consider different aspects of the real constructions and how they might best be represented at scale and within the time frame allowed to produce the model. Materiality was a prime consideration with the most successful examples providing a balance of different materials across the model construction.

1st year paradigms 2015 (8)1st year paradigms 2015 (22) 1st year paradigms 2015 (9) 1st year paradigms 2015 (11)

Things to Consider: Always Printing Plans

One crucial part of getting these projects started was to get correctly scaled plans printed for reference. A number of groups hadn’t considered this necessary as they had smaller plans and scale rules for conversion. We highly recommend getting at least one printed correctly scaled site plan for reference when producing your models. Without one to hand you will spend a great deal of time referring to cad or wrongly scaled drawings for reference when you could easily be comparing your model components to an accurate plan on your desk .

1st year paradigms 2015 (12) 1st year paradigms 2015 (13)

Photographing Models

As part of submissions students also had to produce a pamphlet detailing the key facts about their chosen piece of architecture. This meant taking photographs for their models had a duel use providing images for their pamphlet and their portfolios. Anyone wishing to use the studio space to take photos of their current or past work should drop in and we can advise on availability and help you set up to shoot.

image3

1st year paradigms 2015 (14)

Stahl House 22 (9)Frank House (20)Frank House (27)The completed models were then placed together with the other submission requirements in a small exhibition of paradigm studies back at the studio space.

image1 image2

Some great work and valuable lessons learned for all – first years are really pushing the expectations for the next waves of students! Well done everyone – see you for the next project!

Scott and Jim

Student Survey

Posted on by

All MSA students should have now received notification via email or Moodle that we are conducting a survey about our workshop facilities and services. Every response we get is valued and taken into consideration so please take the time to give us your opinions about what works and doesn’t with the B.15 Workshop.

The feedback from this survey will help us plan for future investments in equipment and our overall role within the school.

Many Thanks, Scott and Jim

B.15:45 Extended Interview with Eamonn Canniffe

Posted on by

As part of our B.15:45 Exhibition we put together a short film telling the story of how modelmaking is used in the life of an architecture student and beyond. The full versions of the interviews tell many more interesting stories of modelmaking with individual case studies and memories accounted first hand by staff past and present.

In this first extended interview with MSA Principal Lecturer Eamonn Canniffe we hear about how history models have been used as precedent examples and tools in understanding space as well as thoughts on the introduction of digital tools to the school over the past 30 years.

Modelmaker Profile: Janis Strazdins and Lelde Strazdina, Maquettica, Riga

Posted on by

_1040915_xs

We were recently visited by the two Modelmakers from a company called Maquettica based in Riga, Latvia. Janis Strazdins, CEO and Lelde Strazdiņa senior Modelmaker at the company have recently travelled across the UK researching the commercial role of Architectural Modelmaking. As part of their trip they stopped by to view our exhibition and we gave them a tour of our facility.

DSCF0008_xs

As we are always interested to understand how others work in the field of modelmaking we asked them to tell us their story.

As modelmakers we came intuitively.Janis made his first architectural model already at the age of 14, it was his parents house at country side and he did it just for fun.

 We both have an architectural education, but in Latvia there are no special programs or
studies for architectural modelmaking. At the university here the architectural models are just a need which you add to your project. We spent much more time than other students on model making because we enjoyed the process a lot and gradually we started to be more and more interested in this speciality.

fd1e68feb3a8987ae307370871769ff5

_1090424_xs

Logically we got our first orders, sometimes from other students, and very quickly our activity turned professional. Since then we still grow and develop our studio by digging and searching for the most appropriate materials, tools and equipment which allows us to work creatively, accurately and in high quality.

_1060827_xs

Our main occupation is realistic architectural models for marketing and presentation purposes and product prototype making, but unfortunately in our country the market is too small to survive only as modelmaking studio so we have added some more products and services that we are able to make with the equipment that we have for modelmaking.

We separated those other products from architectural models and put them all to ‘Ouzel‘, a branch off company.

_1020887_xs _1050875_xs

Ouzel is our idea visualization studio which provides design objects, museum exposition and unique interior elements, such as decorations, furniture elements, lighting objects, etc.

Generally our clients are real estate developers, architects, also architecture students and individuals.In some cases museums, specific companies (for example factories or adventure parks).

_MG_8303_xs

Architects usually need the models for presentation, usually when they participate in competitions. Real estate developers use very realistic scale models as a marketing instrument. They are made very precisely from technical drawings.Adventure parks, they also need realistic models, but the main purpose is to make them attractive.To receive all necessary information for model making we have created on-line inquiry form on our website, but mainly for a proposal it is enough to have territory plan, building plan, facades and some visualizations.

DSCF8796_xs_1100033_xs

 

DSC_0024_xs

The B.15:45 exhibition we visited is one step closer to explaining to society why modelmaking is worth the effort and also what it takes (a lot of time, patience, enthusiasm, spatial and constructive perception, knowledges, materials, equipment, ..) to make an architectural model that works.

Your workshop is Latvian architecture students dream to have at University. The variety of materials, tools, equipment and possibility to ask enthusiastic professors for advice – these opportunities allow a student to work at their project more creatively, confidentlyand whilst having more fun. A student’s activity in the workshop lets them feel the physical interaction – materials, shapes, light, .. which is impossible to get from a computer.

You can find out more about Maquettica on their website here. http://www.maquettica.eu/

Thank you to all who took part and supported Modelmaking in the Digital Age

Posted on by

DSC03933

Just a quick message to everyone who came to speak and helped us make yesterday’s symposium event possible. We thoroughly enjoyed the day and everyone was extremely positive about our approach to modelmaking and it’s future in architecture.

In all we had 90+ registered guests from a variety of backgrounds all with a shared interest of the subject. Thank you for all your support, it means a lot.

The event was full of interesting presentations and discussions that we are hopeful will lead to further expansion and future events orientated around the subject of how we use models in architecture.

B15-45

Syposium Pics (8)

We will be uploading footage of the event for those who missed it in the coming months so stay tuned for those.

DSC03939

Many thanks to all again – we can’t thank you enough!

Scott and Jim