Coexistence in Theory 3rd Year Mancunian Way Site Plan

3rd year Coexistence in Theory has been focussing on a stalled site located next to the Mancunian way in Manchester. The group will use this abandoned infrastructure to propose new interventions that will bridge the site bringing in to back into functional use.
3rd Year Site Model (1) 3rd Year Site Model (4) The group decided to represent a large portion of the Mancunian way which runs through the city along with building massing and defined roadways across the site. This was done by overlaying grey card board pieces to act as raised pavements creating contrast with the light coloured plywood base below which provides the road areas.

3rd Year Site Model (11) 3rd Year Site Model (7)The stalled site in question is represented in more detail due to its importance and comparative skeletal appearance to the rest of the buildings in the area. This was made using laser cut ply whilst the main massing of the rest of the model is made us of blocks of pine cut and sanded to shape.

3rd Year Site Model (13) 3rd Year Site Model (16) Group member Georgina Erotokritou described why the group are producing the model for their projects:

“It’s the easiest and most understandable way to explain ideas, space and arrangements in 3D space. Because this model covers a wider context it is easier for the viewer to see the entire picture and see how our buildings connect to the site.” 

The model is now being used as a stage to present the groups ideas as they develop throughout the year.

3rd Year Site Model (17)

Structural Detail Models, Year 2 BA Architecture

DSC01345Last week 2nd year students were given the task of further refining their designs for structural elements. By taking their initial ideas to the next stage they came up against many more problems to solve in particular how joining replicated components would work in practice as they made seven identical units to work with one another towards supporting a structure or forming a building form. DSC01314 DSC01315 DSC01317 DSC01325DSC01319In many cases designs will test the limits of the machines available anda degree of initiative will be required to solve the problem. In Georgia Govan’s case the angle she required for her components to fit together was too sharp to be machined and the profile nature of the laser cutter meant she had to use a ‘Jig’ to get the job done. This side of a task can often be time consuming and should not be underestimated. A lot of thought is required to design an effective jig but it’s worth the effort and the learning curve you will go through.
DSC01310

DSC01323 DSC01335Marco Wan had an interesting approach to creating the curved planes for his design. This process is called ‘glulam’ and as the name hints at, involves laminating sheets together with layers of glue and material whilst clamped in a given shape. This produced a very strong formed shape that can and is used for many 1:1 building applications. Very nice to see a student employing this technique in their model development.

DSC01326 DSC01327 DSC01339DSC01331DSC01329DSC01357DSC01322DSC01333

DSC01312DSC01338DSC01341DSC01344DSC01342DSC01350DSC01347DSC01352DSC01349DSC01353 DSC01320DSC01355 DSC01356DSC01359 DSC01362